Plastic Blister Packaging Machine

By admin Thursday May 14, 2009

This machine is widely used for packing tablets, capsules and other similar shape solid articles with alu-plastics & alu-alu blister in pharmaceutical, chemical, foodstuff industries. The machine can finish the following actions automatically: Aluminium foil or Plastic (PVC) blister forming, automatic material feeding, PTP alu-foil press and heat-sealing, press the batch number & perforation and punching.

Features:

1. Speed controlled by frequency inverter, the stroke can be adjusted under the stroke range
2. Adopt modular moulds, it is easy and convenient to install, adjust and change over the mould.
3. Adopt PLC +touch screen control system, can indicate the trouble cause, it’s easy to operate and maintain.
4. Both alu-alu and alu-plastics blister packaging can be realized via change the concerned parts.
5. The photoelectric register device (Optional) can be equipped, make the blister sheet more beautiful.
6. Machine can be separated two parts, entering into 1.5m elevator and finished segmented clean workshop is available.

Technical Parameters:
Machine Model
DPP-250EII

Output
48 000-208 000 Capsules or tablets/Hour

Punching Times
20-40 Punches for Alu/PVC, 15-25 Punches for Alu/alu

Stroke Length
30-120mm -Special Stroke can reach to 160mm

Max. Forming Area & Depth
112× 245× 18mm for alu/pvc (Length× Width× Depth)-special forming depth can reach to 30mm

112× 245× 16mm for alu/alu (Length× Width× Depth)

Packaging Material
PVC: (0.15-0.40)× 250mm (thickness× Width)

Forming Alu-foil: (0.15-0.20) × 250mm (thickness× Width)

PTP Lid Alu-foil: (0.05-0.17) × 250mm (thickness× Width)

Air Supply
Clean Compressed Air: 0.6-0.8 Mpa ≥0.38M3/min

Power Supply
380V± 10%, 50/60Hz, 3ph 5.7Kw (nonstandard Voltages upon request).

Water Supply
Cooling water for mould: Running Water 80L/h, (Water cooler-optional)