Aside from trying to get rid of plastic, creating it can be costly to the environment as well. It takes large amounts of chemical pollutants to create plastic, as well as significant amounts of fossil fuels.

On the other hand, some argue that plastic helps the environment is several ways, as well. After all, plastic has been used to make cars lighter. As a result, less oil is used to mobilize the cars and less CO2 is emitted. In addition, plastic containers provide safe ways for disposing of toxic waste products

The following are some suggestions for reducing the effects on environment:

1. Reduce the use
Source reduction Retailers and consumers can select products that use little or no packaging. Select packaging materials that are recycled into new packaging – such as glass and paper. If people refuse plastic as a packaging material, the industry will decrease production for that purpose, and the associated problems such as energy use, pollution, and adverse health effects will diminish.

2. Reuse containers
Since refillable plastic containers can be reused about 25 times, container reuse can lead to a substantial reduction in the demand for disposable plastic, and reduced use of materials and energy, with the consequent reduced environmental impacts. Container designers will take into account the fate of the container beyond the point of sale and consider the service the container provides. “Design for service” differs sharply from “design for disposal”.

3. Require producers to take back resins
Get plastic manufacturers directly involved with plastic disposal and closing the material loop, which can stimulate them to consider the product’s life cycle from cradle to grave. Make reprocessing easier by limiting the number of container types and shapes, using only one type of resin in each container, making collapsible containers, eliminating pigments, using water-dispersible adhesives for labels, and phasing out associated metals such as aluminum seals. Container and resin makers can help develop the reprocessing infrastructure by taking back plastic from consumers.

4. Legislatively require recycled content
Requiring that all containers be composed of a percentage of post-consumer material reduces the amount of virgin material consumed.

5. Standardize labeling and inform the public
The chasing arrows symbol on plastics is an example of an ambiguous and misleading label. Significantly different standardized labels for “recycled,” “recyclable,” and “made of plastic type X” must be developed.

An old lady of the United States, with good creative imagination, invented this pet-specific umbrella, all this stems from her dog who likes to go out even if the rainy day, but also inconvenient to wear a dog raincoats, and the dog do not like her dog  poncho. So she change the normal umbrella reverse, and there is a button hook in the middle of the umbrella shaft collar. On rainy days you can use this plastic umbrella instead of dog chain. The entire umbrella is made transparent plastic, because she would like to see her dog’s status, such as when he finishes piddle, you can directly observe that.

Character:
1. Double cylinder for nozzle forwarding, to ensure the balance, sealing and no material leakage
2. High quality hydro-motor, oil pump, valve, seal and high pressure hose.
3. T slot suitable for different mould setting
4. Automatic centralized lubrication system composed of high quality lubrication components, with oil out alarm.
5. Stainless steel hopper, drying hopper for choice.
6. Micro-processor professional controller. Multiple language for choice
7. Adopt waterproof and sealed cabinet, electric parts from famous maker are used to ensure quality
8 Widen safety door to accommodate the core pulling cylinder of the PVC mould
9. Two groups of core pulling devices, including 2 sets of in/ out hose fittings for core cylinder connectivity
10. Hardened chromed nozzle, large nozzle hole that ensures product flow and volume
11. Hardened chromed special screw for PVC powder, excellent plasticizing and highly corrosion resistant
12. Barrel fitted with blower to ensure precise temperature control with an even narrow melt range
13. Oversized hydraulic motor matched to meet the large torque requirements needed for plasticising PVC

Model No. 1 QR188PVC

INJECTION UNIT
Screw Diameter: 50 mm
Screw L/D Ratio: 20.0
Shot Size(Theoretical. ) 414 cm3
Injection Weight: 538 g
Injection Rate: 166 cm3/s
Injection Pressure: 176MPa
Injection Stroke: 211mm
Screw Speed: 0~185 rpm

CLAMPING UNIT
Clamping Force: 1880 KN
Clamping Stroke: 470 mm
Space Between Tie Bars: 510× 470 mm
Max. Mold Height: 500 mm
Min. Mold Height: 180 mm
Ejector Stroke/Force: 125/53 mm /KN
No. Of Ejector Pins: 5 pc

OTHERS
Max. Pump Pressure 16 Mpa
Pump Motor Power 18.5 KW
Heater Power 9.3 KW
Hopper Capacity 50 Kg
Oil Tank Capacity: 310 L
Machine Dimension(L*W*H): 5.3× 1.6× 2.1 m
Machine Weight 6.7 T

Model No. 2 QR230PVC

INJECTION UNIT
Screw Diameter: 55 mm
Screw L/D Ratio: 21.8
Shot Size(Theoretical. ) 593 cm3
Injection Weight: 771 g
Injection Rate: 171 cm3/s
Injection Pressure: 184MPa
Injection Stroke: 250 mm
Screw Speed: 0~157 rpm

CLAMPING UNIT
Clamping Force: 2300 KN
Clamping Stroke: 510 mm
Space Between Tie Bars: 560× 530mm
Max. Mold Height: 550 mm
Min. Mold Height: 200 mm
Ejector Stroke/Force: 135/62 mm /KN
No. Of Ejector Pins: 9 pc

OTHERS

Max. Pump Pressure 16 Mpa
Pump Motor Power 22 KW
Heater Power 12 KW
Hopper Capacity 50 Kg
Oil Tank Capacity: 400 L
Machine Dimension(L*W*H): 6× 1.6× 2.2 m
Machine Weight 8.0 T

Notice: Due to continuous improvements, we reserve the right to amend any aspect of the specifications in website without prior notice. The products in website is just for reference, as per sample.

In the hot summer, this special vase and colorful flowers can make your room cool and beautiful. After summer or when you don’t want to use it, you can fold it  and put into the drawer.

Size of this vase without water

height：26.8cm   width of bottom ：16cm  width of  mouth：10cm

The most famous jelly shoe brand is Brazil Melissa. It not only has the advantage of low production costs , and cooperated with the world famouse designers that make the plastic shoes has fashion design.   The shoes use special materials with good waterproof, breathable, comfort features, and pay attention to the development of ergonomic.
Recently the most popular activity, of course, is the cooperation with the Empress Dowager -Vivienne Westwood.

Vivienne Westwood× Melissa, Jelly shoes for spring and summer 2009

Everything talking about  from Marc Jacobs. A few years ago he introduced plastic mouse shoes which popular over the world, almost every girls has a pair. After several changes, the head became from a rat into the traditional toe, but it still has the jelly design. And the color is so pleasant.

Left: Marc Jacobs design
Right: Tory Burch design

Because of the materials, the prices are much lower than other shoes, but very colorful and eye-catching, easy style.

Melissa brands and styles in a variety of exploration on the design are worth learning. The dazzling white shoes looks like the bird nest.

How beautiful is the light and shadow on the wall, gorgeous and ordered. Can you image what materials does the lampshade made of ? Yes, it is actually made of disused plastic bottles.

The main body of this fashion light is a global lamp with many little holes. It is Ok after insert the plastic bottles into the holes. It is cast many different colour lights after the light reaches the rugged bottom of the plastic bottles. It will become more gorgeous when the bottles filled with water.

It is design by Shelley Spicuzza. It is another good way of reuse, not only put the disused plastic bottles into the recycle bin.

This strong design furniture will bright your home immediately

Compare to the woodern or metal furniture, the plastic furniture has it’s special advantages. With strong malleability, It can be made to any sharps,  and it’s very  easy to match with other furnitures for it’s rich colour. So plastic furniture has been seen in the every corner of the home

The maintenance of plastic furniture is simple . Washing it with water , just OK. It feels comfortable to sit on the plastic chair. This bar chair is enough to make you feeling cool.

Many curious design furniture had appeared in fashionistas ’s home. Perfect combination of colour and sharp make you love it.

The effect of plastic furniture in the home

There are many kind of plastic furniture, such as large furniture of plastic chair, plastic cabinet, plastic table, or small accessories of glass, lampshade.

You can buy some same style but different color chair, and used with glass made tables, put them in living room, study room or bedroom as you like.

Or you can dress your lampshades with colourful plastic coats, this simple methords will upgrade your home design, making your home lively.

This kind of plastic bicycle not only has beautiful appearance, but also comfortable and safety when you riding. This plastic city bicycle use recyclable materials with fashion design.  It is a healthy and green bicycle for independent traveller.           

The designer of this bicycle said that it had two independent brakes and three-dimensional lignting equipment. For it’s special plastic structure, this bicycle was combined with many creative fittings, so that it made the body of this bicycle fluently.

Besides you can change the colour of the bicycle base on the bicycle’s main structure, and it’s not expensive.

The designer of this IZZY BIKE are Omer Sagiv and Uri Sadeh.